Synthetic Rubber Product

Synthetic Rubber Products are made from various chemicals rather than tree latex. Synthetic rubber can be produced easily in large amounts and customised to resist heat, chemicals, oils, and weather.

Made from petrochemicals, not natural latex

Flexible and elastic like natural rubber

Resistant to heat, cold, oils, and many chemicals

Durable and strong under mechanical stress

Some types resist flames, ozone, and UV rays

Can be customised for softness or hardness

Good resistance to ageing and weather conditions

Designed for consistent quality and performance

Technical Specifications of Synthetic Rubber Product

Synthetic rubber products combine high durability, flexibility, and broad chemical resistance, making them suitable for demanding industrial and commercial applications across extreme environments.

Parameter	Specification
Durometer Hardness	20-95 Shore A
Tensile Strength	500-4000 PSI
Elongation	100-800%
Temperature Range	-60°C to +200°C
Density	0.90-1.25 g/cm³
Abrasion Resistance	50-150 mm³ loss
Compression Set	15-60%
Tear Strength	20-200 ppi
Chemical Resistance	Oil, fuel, acid grades
Sheet Thickness	0.5-50mm
Types Available	NR, SBR, NBR, EPDM, Viton, Silicone

What is a Synthetic Rubber Product?

Synthetic Rubber Sheets Seals Hoses UAE | Chemical-Resistant Elastomer Dubai Supplier – Synthetic rubber products deliver unmatched chemical resistance, temperature flexibility (-60°C to +200°C), and custom durometer hardness for UAE’s automotive seals, construction gaskets, and industrial hoses.

20-95 Shore A range with 500-4000 PSI tensile strength replaces natural rubber across Jebel Ali factories while surviving permanent immersion in oils, fuels, acids, and 50-year outdoor exposure.

Features of Synthetic Rubber Product

Features of Synthetic Rubber Products:

Oil-fuel resistant: NBR/Viton survives permanent immersion.
Weatherproof: EPDM rated 50 years UV/ozone exposure.
Flame-retardant: Special grades for safety-critical apps.
Custom compounds: 20 Shore soft to 95 Shore rigid.
Food-grade compliant: FDA/USDA silicone, EPDM available.
High-abrasion SBR: Conveyor belting survives 10M tons.
24hr Dubai extrusion: Custom profiles from inventory.

Applications

Jebel Ali automotive assemblers extrude 70 Shore NBR into oil seals, O-rings, and crankshaft gaskets surviving 150°C engine oil. Sharjah construction firms deploy 60 Shore EPDM roof membranes and expansion joints that resist 50-year desert UV exposure. Dubai food processors slice 50 Shore white silicone sheets for FDA-approved dough divider curtains.

Ras Al Khaimah oilfield service mold 90 Shore Viton wellhead packers surviving 200°C H2S. Abu Dhabi marine repair vulcanized 40 Shore NR fender panels to absorb 100-ton berthing loads.

How to Use?

Here are the step-by-step instructions on how to use synthetic rubber products:

Wear safety gloves to protect your hands when handling synthetic rubber products.
Select compound matching service conditions (NBR oil, EPDM weather).
Surface prep mandatory – IPA wipe before adhesive bonding.
Vulcanize 160°C × 20min for permanent installations.
Store flat, away from ozone generators and copper/brass.
Custom extrusion minimum order 50m for profiles.
Pressure test seals to 1.5x operating pressure.

Safety Guidelines

Follow these simple safety guidelines while using synthetic rubber products:

Wear safety gloves to protect your hands from sharp die-cut edges.
Use safety glasses to shield eyes from vulcanization flash.
Work in well-ventilated areas during adhesive/hot molding.
Avoid flame contact unless FR-rated compounds specified.
Store away from petroleum oils unless an oil-resistant grade.
Inspect regularly for cracking, hardening, or swelling.
Dispose of per industrial elastomer waste regulations.

Why Choose Us

Avicos compounds RMA Class A rubbers with <0.5% ash content vs commodity averaging 3%. Jebel Ali seal makers specify our NBR 70 because 400% elongation survives 10-year oil immersion. Sharjah roofers standardize EPDM 60 – 50-year UV warranty guaranteed.

We stock NR/SBR/NBR/EPDM/Viton/Silicone sheets, custom hose extrusion, precision molding, die-cutting services. 24hr turnaround standard. Full ASTM/DIN testing included.

Synthetic Rubber Product